Shock absorbers and struts keep your tyres pressed onto the road. They wear gradually, so the change is easy to get used to — but worn shocks affect braking, handling and tyre life, not just comfort.
Signs to look for
- Bouncing. The car keeps bouncing after a bump or dip instead of settling straight away.
- Nose-diving under braking, or the rear squatting when you accelerate.
- Body roll and sway in corners or crosswinds.
- Cupped or scalloped tyre wear — patchy dips around the tread.
- Oil on the shock body. A leaking shock has lost fluid and won't damp properly.
- Knocks and clunks over bumps (though these can also be worn bushes, links or mounts).
- The car sitting lower at one corner, which can point to a tired or broken spring.
Why it matters for safety
When shocks can't control the wheel's movement, the tyre spends less time in firm contact with the road. That can lengthen stopping distances, especially on rough or wet roads, and make the car less stable in an emergency swerve.
Why they're replaced in pairs
Shocks and struts are replaced in pairs on the same axle — both fronts or both rears — so each side behaves the same. A new shock on one side and an old one on the other can make the car handle unevenly.
After strut replacement
On cars with struts, replacing them can change the wheel alignment, so an alignment check afterwards is recommended. Alignments are done on an alignment machine at a tyre or alignment shop.
Other suspension parts
Many suspension noises and handling problems come from parts other than the shocks: control arm bushes, ball joints, sway-bar links and springs. A proper inspection finds which part is actually worn, so you're not paying for parts you don't need.
We do suspension inspections and replacements on site, including shocks, struts, springs, links and bushes.
Related: Humming noise that gets louder with speed? It might be a wheel bearing.